Weld-On Frame Hardtail
Before you order — V-Twin tech note
- Due to the welding process this may vary slightly and builder will need to modify accordingly.
- Suggested to use with #42-9912 Chrome Battery Carrier Kit.
- Suggested to use with #42-9917 Chrome Battery Carrier Kit.
- Suggested to use with #23-0587 Replica Chrome Rear Calilper with Bracket and Brake Pads.
- Suggested to use with #52-1081 16" Rear Spoke Wheel.
- Suggested to use with #44-0638 Raw Rear Axle.
Description
Weld on hardtail with weld on bracket for stock frames with 2000-UP disc brake. The adjuster block are on the outside of the rear axle plate and are threaded to accept the axle adjuster kit. This hardtail accepts 3/4" axle. Top seat plate is included but must be welded on by customer or fabricator. DIY hardtail is easy to install as the alignment is accomplished by the mount design provided. Custom application on 1979-1981 XL. Order battery carrier, rear belt, axle, 2000-up caliper, caliper mount, exhaust bracket and hardware separately. Welding should be performed by a skilled welding technician. The axle's width ranges from 11-1/4" - 11-3/4". Installer may spread or compress to necessary width.
*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Specifications
- V-Twin number
- 51-0982
- Manufacturer
- V-Twin
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Tubing Diameter: 1.023"
- 2026 catalogue pages
- 947