Factory Sample Replica Rear Fender with Hinged Tail
Description
Factory Sample replica rear fender with hinged tail and tail lamp cutout. Accepts late 1973-up large style tail lamp. Fender has turn signal bar indent and holes. Fender is for use with a 16" or 19" whee. Please mount to struts before painting or finishing. Check mount hole locations for struts. Holes may have to be enlarged for certain strut hole locations. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation! The tail lamp mounting holes are 2-1/2" apart. The holes with indents are 6" apart, sitting 1" below the mounting holes and 1-3/4" outside of tail lamp holes. Factory sample is a brand new pre-production parts but may have imperfections on the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical defects, such as cracks or holes, there will be cosmetic imperfections only. Sample parts may show marks from installation test and fitment.
*NOTE: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which wil
Specifications
- V-Twin number
- 50-2239
- OEM number
- 59604-69C
- Manufacturer
- V-Twin
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Width: 7-1/4"
- Style
- Stock