VL Spring Fork Front Fender
You will also need another part
- Required Required to use with OEM #3730-34, the bracket which mounts to rocker stud, as listed in VT #48-0328 JD-VL-EL-UL Parts Manual.
Description
Spring fork front fender features a raw finish and is the exact body shape of the 1934-1936 VL. This Spring Fork fender mounts to the 2 front tabs on the front Spring Fork leg and features wide braces and includes the lower bracket set, which is riveted in place. The wide braces are 5/8" wide and are 10-3/4" apart at the rocker stud position. Fender braces include the slotted key hole type mount, to mount to the outside of the rockers on the front stud. The fender brace set uses 16.04mm x 4.15mm thick material. The holes in the top of the fender must be added and the inner brace is included for this top mount position, but must be drilled and spot welded in place.
*NOTE: The top mount holes should be countersunk and drilled by builder.
Specifications
- V-Twin number
- 50-0643
- Manufacturer
- Wyatt Gatling
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Width: 7-1/4"
- 2026 catalogue pages
- 820
Goes with this part
V-Twin lists these alongside 50-0643 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.