1955-57 FL Rigid Rear Fender
Before you order — V-Twin tech note
- Fender hinge construction updated 2024.
- Underside of rigid rear fender details: A) Wire Loom Spring,B) Hinge Junction, C) Loom Clip Strip on Fender Radius, D) Spring Clip, E) 7/8" Wide Brace, F) Ribbed Chain Panel.
- *NOTE: Replacement fender ordered thru H-D dealer came with 3/4" brackets. These were over the counter replacements, not OEM installed at the factory.
- Suggested to use with #33-0300 Stock Type Chrome oval Tail Lamp.
- Suggested to use with #50-1250, Wire loom Fender Strip Raw
- Suggested to use with #33-1804 Tail Lamp with Glass Lens
- Suggested to use with #33-0299 Replica Tail Lamp Primer
- Suggested to use with #33-1551 License Plate Frame Bracket Black
Description
2024 New Production replica rigid rear fender has a 3 rib indent on the rear chain relief cut out. Fender is fully assembled and riveted together with hinge. Fender features a raw finish and 7/8" wide strap for braces. Underside of fender includes wire loom track welded in place, side loom track and 2 clips to hold spring loom cover. Spring type flexible loom, available separately. All hinged fenders must be hand fitted at the hinge and pin area. Alignment needs to be adjusted and tweaked to fit your components. Before finishing with primer or painting, fit the fender body, braces, mounting points in place and check the alignment of fender tail and bracket. Fender rivets, hinge and brackets need to be tweaked for final fitment. Patience is required for proper installation!
*NOTE: Chain panel with ribs is built-in as one piece with the fender. Features cut out for 1955-69 tail lamp.
*NOTE: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
*NOTE: Replacement fenders ordered through H-D dealers came with 3/4" brackets that are "over the counter" replacement, not OEM installed by the factory
Specifications
- V-Twin number
- 50-0366
- OEM number
- 59699-55
- Manufacturer
- V-Twin
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Large Loop Width: 1/2"
- Style
- Stock
- 2026 catalogue pages
- 631
- Other Notes
- Width: 7/8"
Goes with this part
V-Twin lists these alongside 50-0366 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.