Message us and we will send you a photo before you order.Rigid Rear Fender Assembled
Before you order — V-Twin tech note
- Suggested to use with #50-0913 Rear Fender Trim Set.
- Fender hinge construction updated 2021.
Description
2022 New Productoion rigid rear fender features relief over skirts to accept stainless fender trim attached by clips. Fender is 7-1/2" wide with 5/8" wide brackets. It is fully assembled and riveted together with hinge and is drilled for the U-clamps. Fender is not equipped with a tail lamp hole. Before finishing with primer or paint installer must prepare fender by checking alignment of fender tail and bracket. All hinged fenders must be hand fitted at hinge and pin area prior to primer or paint. Alignment will have to be adjusted and tweaked to fit your components. Includes replica rigid rear fender hinge, V-Twin 50-1243. We suggest pre-fitting fender prior to painting.
*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Specifications
- V-Twin number
- 50-0360
- Manufacturer
- V-Twin
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Large Loop Width: 1/2"
- Style
- Stock
Goes with this part
V-Twin lists these alongside 50-0360 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.