18" Inline Spring Fork Assembly
You will also need another part
- Required *NOTE: Must order shock, ride control, axle assembly, top tree and bearing kit, as required.
- How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits, to the axle position. This is the effective length, as it is the legnth
- from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame
- height. 1" stem utilized tapered bearings for ease of installation.
- Suggested to use with #24-0150 Stem Cone Nut Black.
- Suggested to use with #24-0656 Fork Installation Kit Ball Type.
Description
Kit includes front and rear black powder coated legs, parkerized outer springs, black rockers, and zinc plated rocker studs. It comes completely assembled with a 1" stem with 1" x 24 thread. Order bearing neck kit, axle kit, top tree and handlebars separately. Some assembly may be required. Bottom of neck is larger in diameter to accommodate the Lower Race. Rear fork leg is not tapped, use standard tap
*NOTE: Does not have the casting marks.
*NOTE: Length measured from bottom of lower race to center of axle on rocerks. See diagram. This complete replica Spring Fork assembly is a product of 14 separate processes: Tubing, Hydraulic Swage Press, Investment Casting, Forging, Flattening Press, Robotic Welding, Brazing, Polish, Chrome, Paint, Spring Winder, Machine Shop, Drill Shop and Packaging.
Specifications
- V-Twin number
- 49-2900
- Manufacturer
- V-Twin
- Size
- STD
- Sold as
- 1 - KIT
- Origin
- Imported
- Measurements
- Length: 18"
- Style
- without Shocks
- 2026 catalogue pages
- 795