18" Spring Fork Assembly Chrome
Before you order — V-Twin tech note
- Unit is unpolished at the rear fork stem cross plate and at the front spring fork rod forging.
- *NOTE: 45" Spring Fork rockers are mounted to the inside of the fork and utilize a 3/8" axle. 45" Servi-Cars, 1947-1957,use Big Twin rockers on the outside of the fork.
- How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits, to the axle position. This is the effective length, as it is the legnth
- from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame
- height. This Spring Fork assembly accepts a 3/4" axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1" stem utilized tapered bearings for
- ease of installation.
- *NOTE: We measure from the top of the rear leg (tube), to the front axle center line.
- *NOTE: UPS may consider this part as packages "oversize" forshipment, as compared to the
Description
Unit features chrome front leg, inner and outer springs, chrome rear leg with 7/8" neck stem, outside type rockers for a 5/8" axle with studs and bushings, and spring rods with bushings. Top clamp, neck races, and cone nut are not included. 1" tubes on top of rear legs are tapped 3/4"-16 to accept threaded riser bushing set, with this installed the builder can use a triple tree without ears and choice of post riser set. These forks are replicas of the stock units with electric welded and brazed construction and will accept all original style components and accessories for the detsiled replica look. For use with interchangeable type 1936-1964 star hub wheels. This complete replica Spring Fork assembly is a product of 14 separate processes: Tubing, Hydraulic Swage Press, Invesement Casting, Forging, Flattening Press, Robotic Welding, Brazing, Polish, Chrome, Paint, Spring Winder, Machine Shop, Drill Shop and Packaging.
Specifications
- V-Twin number
- 49-2414
- Manufacturer
- V-Twin
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Axle Diameter: 5/8"
- 2026 catalogue pages
- 795
Goes with this part
V-Twin lists these alongside 49-2414 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.