Durfee Girder Spring Fork Assembly
Before you order — V-Twin tech note
- Suggested to use with #44-0773 Harmon 3/4" Front Axle.
Description
Chrome spring fork unit is original one piece design of the 1970's Durfee Girder spring fork. Lower tree to axle hole is 5/8". Top nut is 7/8" and stem is 7/8"-24 thread. Rockers suspended by internal springs inside the legs, allowing the rockers to be parallel to the ground for optimun geometry suspension. Fork is constructed of two halves with handlebars built in one length only. Measure between top and bottom tree mount holes is 8.5". Installation requires adding spacers to stem to take up extra space. Stem is 1" between the triple trees space accordingly under top tree. Trees must remain parallel, as determined by the mounting on the fork legs. Top stem is 7/8 x 24 thread. Under tree is 1" x 24 for lock nut, which installs on top of bearing dust cover.
*NOTE: Acorn top nut, available separately.
Specifications
- V-Twin number
- 49-1750
- Manufacturer
- V-Twin
- Sold as
- 1 - EA
- Origin
- Imported
- Style
- Girder