Chopper Peanut Gas Tank
You will also need another part
- Required Tab mounts must be fabricated and welded on by customer.
- Suggested to use with #38-1647 Chopper Peanut Gas Tank Mount Tab Set Raw.
- Tedd Cycle was awarded Hap Jones distribution rights in the spring of 1976, including Avon Tyres, from Hap Jones personally.
Description
Gas tank has a fuel capacity of 2.0 gallons. Tank is a single cap design with front and rear saddle style brackets to fit 1-1/2" frame tubing. It can be bolted or clamped in place. Tank accepts Bayonet type caps. It accepts a 1/4" National Pipe Thread petcock, and a stock style vented cap. Tank fits over 1-1/2" frame tube.
*NOTE: Features a deep tunnel. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Check the petcock opening, making sure the petcock can be easily installed. The petcock fitting should be masked or plugged during painting for easy installation of the petcock. Clean the inside of the tank. It is suggested to pressure test, and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal to help stop leaks and prevent corrosion.
*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Specifications
- V-Twin number
- 38-0783
- Manufacturer
- Wyatt Gatling
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Top Length: 14-3/4"
- Style
- Axed
- 2026 catalogue pages
- 1241
- Other Notes
- Front Width: 8-1/2"
- Front Tunnel Height: 6"
- Rear Tunnel Height: 1"