4" Stretch Image 4.0 Gallon Gas Tank
Before you order — V-Twin tech note
- Suggested to use with #38-0748 Smooth Style Gas Cap Vented.
Description
Gas tank has a left side petcock opening. It features flush lower mounts and includes pop up cap. This Wyatt Gatling tank has a 4" stretch to the back of the tank which does not affect the mounts. The underside of the tank will accept 1/8" National Pipe Thread hose barb fittings for the fuel crossover line. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition and seal to help stop leaks and prevent corrosion. Check petcock opening, making sure the petcock can be easily installed. Petcock fitting should be masked or plugged during painting for easy installation of the petcock. Front hole center to center measures 3-1/4", rear hole center to center is 3" and front to back center to center is 9-1/4".
*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Specifications
- V-Twin number
- 38-0265
- Manufacturer
- Wyatt Gatling
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Top Length: 22.5"
- Style
- Stretch
- 2026 catalogue pages
- 1239
- Other Notes
- Front Width: 11.5"
- Front Tunnel Height: 4"
- Rear Tunnel Height: 2"
Goes with this part
V-Twin lists these alongside 38-0265 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.