Gas and Oil Tank Set Raw
You will also need another part
- Suggested to use gas shut off rod kit #38-7009.
- Suggested to use #41-0113 Kreem gas tank combo kit
- *NOTE: Some 45 tanks installation with a cateye dash will require 1/8" spacers on the top of the tank bolt, to allow the dash base to fit properly.
- Required 45 tank set spacer is required to allow fitting ash base andcover, use 5/16" inner diameter washer between tanks and frame.
Description
Raw tank set accepts cateye dash plate, early 1937-1946 shifter gate and gas shut off rod kit. Drain plug is 5/8"-18UNF. Feed thread is 1/8"-27NPT. Vent hole for banjo bolt is 3/8"-24 UNF. Return Hole is 1/8"-27NPT. May require fuel rod alignment, using V-Twin #16-0182, prior to painting, and installation of the shut off rod assembly.
*NOTE: Gas is on the left and oil is on the right. Please test fitment before painting. Tank weld seams may require filler to meet your individual requirements. Do not grind or sand the seams as this may cause leaks. We suggest using Kreem gas tank combo kitto clean, condition and seal. Check petcock opening, making sure the petcock can be easily installed. Petcock fitting should be masked or plugged during painting for easy installation of petcock. **NOTE: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Specifications
- V-Twin number
- 38-0114
- Manufacturer
- Wyatt Gatling
- Sold as
- 1 - SET
- Origin
- Imported
- Measurements
- Gas Capacity: 3.4 Gallon
- 2026 catalogue pages
- 821