Replica 4 Speed Transmission
Before you order — V-Twin tech note
- Suggested to use with #12-2109 Kick Starter Cover Stud Set.
- Suggested to use with #9637-13 Transmission Kick Starter Cover Stud Kit.
Description
Replica 4-speed transmission with rotary top and mount lugs to accept aluminum inner primary covers for FX models. Replica 4 speed transmission with a 2.44 ratio and includes cast case internal parts, chrome kicker cover and components, clutch rod, throwout bearing, natural finish rotary top with chrome dust cover, arm, mount studs, hub nut, seal & key. Transmission features case with mount lugs to accept aluminum inner primary covers. Speedometer drive gear is supplied with a 1:1 ratio. Torrington needle bearings are used throughout. Will accept belt or chain final rear drive which accepts eletric start. The shift pattern will be reversed when installed in mid-shift models as it has the FL type rotary top to be used with forward controls. No Manufacturer's Statement of Origin required, Bill of Sale only.
*NOTE: Kick starter cover studs are supplied for the kick starter only: for battery box, starter bracket, FXE brake pedal mount and FLH passenger footpeg mount, longer studs are required.
Specifications
- V-Twin number
- 17-0013
- Manufacturer
- Motorshop
- Sold as
- 1 - EA
- Origin
- USA
Goes with this part
V-Twin lists these alongside 17-0013 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.