Replica 4 Speed Transmission
Before you order — V-Twin tech note
- Suggested to use with #12-2109 Kick Starter Cover Stud Set.
- Suggested to use with #9637-13 Transmission Kick Starter Cover Stud Kit.
Description
Replica 4-speed transmission with rotary top and mount lugs to accept aluminum inner primary covers. Replica 4-speed transmission with a 3.00 ratio includes cast case internal parts, chrome kicker cover and components, clutch rod, throwout bearing, natural finish ratchet top with chrome dust cover, arm, mount studs, hub nut, seal and key. Transmission features case with mount lugs to accept aluminum inner primary covers. Speedometer drive gear is supplied with a 1:1 ratio. Torrington needle bearings are used throughout. Will accept belt or chain final rear drive which accepts electric start. The shift pattern will be reversed when installed in mid-shift models as it has the FL type ratchet top to be used with forward controls. No Manufacturer's Statement of Origin required, Bill of Sale only.
*NOTE: Kick starter cover studs are supplied for the kick starter only: for battery box, starter bracket, FXE brake pedal mount and FLH passenger footpeg mount, longer studs are required.
Specifications
- V-Twin number
- 17-0012
- Manufacturer
- Motorshop
- Sold as
- 1 - EA
- Origin
- USA
Goes with this part
V-Twin lists these alongside 17-0012 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.