84 Shovelhead Cylinder Kit
Description
Sifton 3-5/8" cylinder kit has stock length cylinders for Shovelhead models and is for use with 80" flywheels. For installation of 3-5/8" cylinders after spigot holes have been enlarged. (See diagram for photos.)
*NOTE: 3-5/8" cylinders are drilled to use with 4-1/2" and 4-1/4" stroke. Finished bore size is 3.6270". These cylinders will require crankcase cylinder spigot holes to be bored out. Disassmbly of engine is required to install these cylinders.
*NOTE: Includes head bolts and gaskets for the big bore installation.
*NOTE: All cast iron cylinders have same piston to wall clearance .0025 -.003.
Specifications
- V-Twin number
- 11-0297
- Manufacturer
- Motorshop
- Sold as
- 1 - KIT
- Origin
- Imported
- Measurements
- Sleeve I.D.: 3.6"
Goes with this part
V-Twin lists these alongside 11-0297 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.