Message us and we will send you a photo before you order.4 Finned Polished Cam Cover
Before you order — V-Twin tech note
- Suggested to use with #9795-12 Cam Cover Screw Kit Cadmium.
- *NOTE: Final reaming for fit should be completed with cover on the right side case, reamed from the left side.
Description
4-fin style cam cover features forged construction with a polished finish. The top oil bolt hole for overhead oiler Panhead models is drilled and tapped for 1/8" NPT oil lines. Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered screw holes may require a deeper counter sink, check with screw head before installation. May require some modification for proper fitment. Cover is accurate for 1963-1969 FL models because of the four fin feature.
*NOTE: Check oil passage (drilled hole) into bronze bushings, either on existing bushings or when replacing bushings. Generator holes for 32E 6 volt 2 brush generators are 1/4" on Pre-1957 models and 5/16" on 1958-1969 models.
Specifications
- V-Twin number
- 10-1894
- Manufacturer
- Motorshop
- Finish
- Polished
- Sold as
- 1 - EA
- Origin
- Imported
Goes with this part
V-Twin lists these alongside 10-1894 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.