8-Finned Panhead Cam Cover Cast
Before you order — V-Twin tech note
- *NOTE: Final reaming for fit should be completed with cover on the right side case, reamed from the left side.
Description
Panhead 8-finned cam cover features a natural cast finish and has a Hubbard welch plug installed, as original. This cover is exact for 1952 Panheads. Cam cover does not include OHO oil feed hole.
*NOTE: Dense material blank forged from 1 piece billet, as original Alcoa construction. Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered screw holes may require a deeper counter sink, check with screw head before installation. May require some modification for proper fitment.
*NOTE: Check oil passage (drilled hole) into bronze bushings, either on existing bushings or when replacing bushings. Generator holes for 32E 6 volt 2 brush generators are 1/4" on Pre-1957 models and 5/16" on 1958-1969 models.
Specifications
- V-Twin number
- 10-1439
- Manufacturer
- V-Twin
- Sold as
- 1 - EA
- Origin
- Imported
Goes with this part
V-Twin lists these alongside 10-1439 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.