Panhead Cylinder Heads 3-5/8" Big Bore
Before you order — V-Twin tech note
- May require outside oiling
Description
V-Twin Motor Shop Ready single plug type Panheads are for use with Big Bore shovel head cylinders only. Comes assembled and are ready to install. Heads are assembled with cast iron guides, valve stem seals, nitrated valves Shovelhead intake and Panhead exhaust, stock style springs and retainers. Features Shovelhead exhaust pipe flange and intake ports accept. Shovelhead o-ring type manifolds. Matched rocker arm assemblies are installed with heat treated studs, nuts and oilers. Panheads feature external oiler for Big Bore applications with up to a .450 lift cam. Order o-ring type intake manifold separately. These heads also accept 3-5/8" big bore Shovelhead cylinders with 98.6mm cylinder flange. Top oiler holes have a 1/8" National Pipe Thread. 1/8" National Pipe Thread pipe plugs are installed.
Specifications
- V-Twin number
- 10-1086
- Manufacturer
- V-Twin
- Sold as
- 1 - SET
- Origin
- Imported
- 2026 catalogue pages
- 521
Goes with this part
V-Twin lists these alongside 10-1086 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.